Description
The SureCall Fusion5s Home Signal Booster (Yagi/2x Panel) is an all-carrier, five-band cellular signal booster kit built for larger homes and small offices up to 6,000 sq. ft. with 5 to 10 simultaneous users. It combines Cellular and PCS dual bands with LTE and AWS frequencies to strengthen voice and data for Verizon, AT&T, T-Mobile, and every other major US carrier.
This configuration pairs the same long-range outdoor Yagi directional antenna used in the standard Yagi/Panel kit with two indoor panel antennas instead of one, splitting the boosted signal between two separate rooms, zones, or floors rather than concentrating it in a single area. That makes this the configuration to choose for a home or office with two distinct spaces that both need dedicated coverage — for example, a main floor and a basement, or two separate wings of a building — where a single panel antenna wouldn’t reach both effectively.
SureCall’s certified SC-400 low-loss coax cable connects each antenna to the amplifier for maximum performance, and the kit’s independently reconfigurable band controls let you fine-tune gain per carrier if one signal is weaker than another.
Key Features
- All-carrier, five-band cellular signal booster kit for homes and small offices up to 6,000 sq. ft.
- Independently controlled carrier frequencies with dual embedded CPU
- Eight RSSI detectors monitor every input and output for stable performance
- Stealth uplink technology powers down when not in use, protecting the carrier network
- FCC certified, plug-and-play setup
- Durable metal housing, backed by a 3-year manufacturer warranty
Specifications
| SKU: | SC-POLYSH/O-72-YP2-KIT |
| FREQUENCY (UPLINK): | 698-716 / 776-787, 824-849 / 1850-1910, 1710-1755 MHz (G Block included) |
| FREQUENCY (DOWNLINK): | 728-746, 746-757, 869-894 / 1930-1990, 2110-2155 MHz (G Block included) |
| INPUT IMPEDANCE: | 50 Ohm |
| AVERAGE GAIN: | 65 dB Cellular / 72 dB PCS |
| MAXIMUM GAIN: | 72 dB |
| STANDARDS SUPPORTED: | CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE, and all cellular standards |
| AC POWER: | Input AC 110V, 60Hz |
| DC POWER: | 12V |
| MAX RF OUTPUT POWER: | 1 Watt EIRP |
| NOISE FIGURE: | 6 dB |
| CABLE: | SC-400 |
| RF CONNECTORS: | N-Female on both ends |
| POWER CONSUMPTION: | < 10 W |
| DIMENSIONS: | 9-1/4″ x 6-3/8″ x 1-3/8″ |
| WEIGHT: | 3 lbs. |
Because the Yagi antenna is directional, a one-time aiming step toward the nearest tower is required during installation. Splitting output across two panel antennas does mean less peak signal reaches any single point compared to routing all of it through one panel, so this configuration is best suited to covering two separate areas rather than maximizing signal in just one.
SureCall is a leading name in cellular signal amplification, and this Fusion5s Yagi/2x Panel kit is a dependable way to cover two separate zones of a large home or office from a single booster. Order your SureCall Fusion5s Home Signal Booster (Yagi/2x Panel) today
Looking for other accessories? Browse our full selection of in-building signal booster kits for every setup.
Questions? Contact Us
Warning: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Reviews
There are no reviews yet.